Posts tagged snuggs

wood ceilings

wood ceilings

If you are an entrepreneur ceiling, you know what is behind a pole. This tool is used to attach the metal bridge delays eyes and wooden ceilings from the floor. At the same time, bind the wire grid for the delay. Although mainly used for ceiling work, are becoming increasingly common on construction sites. Electricians use them to support light fixtures. Low voltage contractors are using them to support cable runs, boxes and more. So if you want something to stay with network cables from the ceiling, read on.

wood ceilings

The pole is telescopic late first, set the instrument for a comfortable length. Once you have the right amount of work, connect a battery drill to the end of the pole. Usually a good 1 / 2 “drill battery works well. Insert the delay eye, the drilling drive to the bridge of metal or sharp point for wood, at the end of the instrument.

wood ceilings

Now take the wire and make a false bent at 90 degrees about 6 inches down. Insert the long end of the wire into the slot cut in the center oval and the curve through the eye of a short delay. Fold the short wire down to make a 180 degree bend of the curve at 90 degrees.’re ready to install.

wood ceilings

Now pick up the pole late in the ceiling, and begin to practice until such time as the screw is set.The metal screws have a shoulder on them, so turn up until that snuggs. The wood screw has no shoulder, drill at least one inch. At this point, the screw is set. Now pull down a couple of inches behind the pole, just enough to release the screw from the head pole. You will still trapped in the wire at the end of the pole. Pulse the drill a couple of times and twist the wire to lag. Done!

wood ceilings

This tool makes network wire hung from the ceiling a breeze. They can be cumbersome at first, but if you have never been on a website and I saw an experienced expert with a post late, you will see what a time saver they are.

wood ceilings

A couple of pointers. The oval slots in the pole lag can contain up to about 10 wire grid to fold a couple more and have it act as a “thrilling”. Make sure you have the long end of the wire into the slot or it will whip around. Wear safety goggles whenever you work with wire network. Buy a pole with interchangeable ends to make it more versatile.

wood ceilings